**How To Measure Stairs For Carpet Video**. Add 1 inch and multiply by the number of. Again, don’t forget to allow 10% for waste.

Be sure to extend the tape measure all the way to the outer edge of the step. Begin at the bottom of the stairs and work your way up to the top of the staircase.

Table of Contents

### 20 Incredible Stair Runner Stairs Carpet Stairs Home

Choose the style you like, then order the length you need and install it yourself hassle free for a quarter the price of a local store. Divide the rise by 6 or 7 inches (15 or 18 cm) to find the total number of stairs.

### How To Measure Stairs For Carpet Video

**If you have curve stairs, you need to measure and cut each step in order to fit it.**If your stairs follow the standard dimensions, it will be much easier to measure and lay your carpet, as carpet runners designed for the standard dimensions will be easy to find.It is typically approximately 3′ wide.Mark cut lines on the rug pad.

**Mark the position of your stairs on your plan with an arrow.**Measure carpet for stairs when measuring an area that leads to stairs going down (such as a hallway or landing), be sure to measure around the nosing (the ledge at the top of the stairs).Measure from the back of the top riser over the nose of the step and then to the back of the next step.Measure the drop backs and jot these down, as well as any split levels or steps.

**Measure the height and depth of each stair to give you the length before multiplying by the width.**Measure the stairs carefully for the new carpet.Measure the tread the tread of the step is the part you step on.Measure the width of the stairs with a measuring tape.

**Measure the width, height, and depth of the stairs and use these measurements to calculate the area.**Multiply the total by the number of stairs to determine your total runner length.On straight stairs, stretch a measuring tape or rule around one entire stair, starting at the inside edge of the tread and moving over the outside of the tread and down along the riser below it to the top of the next tread.Record that measurement in your plan.

**Remember to measure all the way into any doorways and measure the widths of doorways and record all these measurements on your plan.**Remove any old carpet from the stairs, along with old underlay, tacks, nails, staples and any other unpleasant things sticking up.Scala is our great value stair carpet range.Simply select your room shape and insert your room measurements to generate printable diagrams.

**Start the carpet measuring calculator.**Starting with the top step, measure the depth of the tread.Stretch out the measuring tape parallel to the edge of a stair to get the width.Take this opportunity to give the stairs a good clean before you start again.

**The basic steps you’ll take to measure your stairs for carpeting are straightforward.**The total you get is how many stairs your future staircase.The usual allowance for the tread (the flat part you step on) is 10, and 8 for the riser (the back of the stair).Then measure the width of the ladder remembering to record only the actual measurements.

**Then, multiply the step area by the total number of stairs in the staircase.**Then, properly place the tackless strips on the riser and back of each tread.There is also a video tutorial to help you.Therefore, for every box stair, you require 3′ (or the width of your stair) x 18 of carpet.

**This number tells you how wide the carpet needs to be to cover the stairs.**This will give you the area of each step.To estimate how long a runner you’ll need, have your installer measure the depth of the stair tread and the height of the riser.To work out how much carpet you need to buy for your stairs, measure one step, from the back of the tread to the bottom of the riser.

**Transform your home’s stairway or landing with one of our exclusive in house designs.**Use a carpet awl to ensure a clean finish between the bottom of the stair riser and the flooring.We will now teach you how to measure carpeting for your stairs.We’ll cover which areas you need to measure to get the correct length and width for your stairs, whether they’re straight or winding.

**When it comes to stairs or steps, the process is similar.**When measuring straight stairs, measure from the back of the top riser (where it meets the previous step), over the nose (edge of the step) and down to the back of the next tread (where it meets the next step), then measure the width and jot both measurements down on your plan.You are then ready to measure the rest of the ladder.You can also create a diagram for your stairs too!

**You want to make sure the runner is centered, with equal amounts of wood on each side, before pressing it into the first tack strip.**